 |
Test and Reviews |
 |
RC8 PRO TEAM |
|
Test and Reviews |
|
RC8 PRO TEAM |
This is the review and building of a TEAM ASSOCIATED RC8 PRO TEAM with all pro's and con's found.
Page 36
 |
Fit both brake rods with the adjustment knobs in the
plastic brake part until the end of the thread is flush. Nice the adjustment knobs are knurled. |
 |
Place the throttle rod as shown. Also here the adjustment screw is knurled. |
 |
Press with a pliers the blue coned washer in the servo arm. |
 |
Place the throttle servo arm on the throttle servo
and and use the original screw that comes with your servo or an
countersunk version of the same size. Opening the top lid of the radio box is not so easy as the throttle servo arm is preventing a straight opening! was the designer sleeping? No he was not as the top lid has a special curve molded in to prevent the servo arm to touch the top lid. But we think he never thought of opening the radio box at all.. |
 |
If you place the throttle plastic part opposite and open the throttle fully the top lid can be opened easily. |
The car is provided by
The muffler is provided by
The VXR LI-PO receiver battery system is provided by
RC-Connect
option parts provided by
King Headz