 |
Test and Reviews |
 |
RC8 PRO TEAM |
|
Test and Reviews |
|
RC8 PRO TEAM |
This is the review and building of a TEAM ASSOCIATED RC8 PRO TEAM with all pro's and con's found.
Page 42
 |
Cut the fuel line in two parts and route it through the plastic part on the chassis. |
 |
Now fit the fuel and pressure line as shown in the
picture. Your routing may vary due to the place the pressure nipple is placed on the muffler |
 |
To remove the fuel tank clips easily we bend them as shown. |
 |
Now the fuel tank clip can be removed and replaced more easily. |
 |
Now the fuel tank clip can be removed and replaced more easily. |
 |
Kit comes with rims only. The rims have molded signs to drill some venting holes if required. |
 |
Here the inside of the rim with the glued tyre. |
 |
Fit the rims to the buggy on all 4 corners. |
The car is provided by
The muffler is provided by
The VXR LI-PO receiver battery system is provided by
RC-Connect
option parts provided by
King Headz