 |
STORM PRO |
|
STORM PRO |
This is the building process of a GS-Racing STORM PRO with all pro's and con's found.
!Click on the pictures to enlarge!
STEP 17
 |
Take for STEP 17 the linkage we made in STEP 13. Use a plyer to press them on the balls. Make sure that the marking of the left/right thread for the RIGHT side upper linkage is on the outside (see red mark). |
 |
Fit the both axles in the dif output. |
 |
Connect the outside of the upper linkage to the hub carrier and use the inner top hole by sliding a 3x25 screw through it. Also watch the mark in the left/right thread (marked green) for this LEFT side of the car. |
 |
Secure the other side with a 3 m/m lock nut. Do the same for the RIGHT side of the car. |
 |
The rear gear box ready too. |
