 |
STORM PRO |
|
STORM PRO |
This is the building process of a GS-Racing STORM PRO with all pro's and con's found.
!Click on the pictures to enlarge!
STEP 18
 |
Take the bag with STEP 18-20 and open it. |
 |
This is the contents of the STEP 18-20 bag. |
 |
The drawing off all parts in bag for step 18-20 |
 |
Take these parts |
 |
Use a plyer to press the ball into the ball joint. Make two of them. |
 |
Use plyer to press the ball into the ball joint (note the different shape). Make two of them. |
 |
Make the length as the manual shows. Just place them on the 1:1 scale drawing. |
 |
Both steering rods ready to mount. Watch the red marks to identify that the left right thread on both steering rods is not the same! This makes adjustments in a later stage easier. |
 |
Mount the RIGHT steering rod with a 3x16 m/m counter sunk screw to the RIGHT steering knuckle. Do not use thread lock! |
 |
Secure the other side of the 3x16 m/m screw with a normal 3 m/m nut. Use some thread lock! |
 |
Fit a 3x20 m/m counter sunk screw with a 3 m/m counter sunk washer in the hole the picture shows. Do not use thread lock! |
 |
Attach the other end of the steering rod and secure it with 3 m/m lock nut. |
 |
The right steering rod ready. |
 |
Do the same sequence for the left side. |
 |
The front steering rods fitted on the car. |
