 |
STORM PRO |
|
STORM PRO |
This is the building process of a GS-Racing STORM PRO with all pro's and con's found.
!Click on the pictures to enlarge!
STEP 34
 |
We need these parts in this step 34. |
 |
Slide the already bend muffler mounting wire through the aluminum holder and fit . |
 |
Fit it from the bottom with a 4x8 counter sunk screw. Use thread lock. |
 |
Slide the front of the muffler over the muffler mounting wire and adjust
the muffler height. Fit a 4x4 m/m set screw in the aluminum holder and secure it with some thread lock. |
 |
Make sure the output of the muffler is free enough from the plastic side
guard. If this is not the case take some material away. |
 |
Now fit the the locking screw of the front part of the muffler and secure it tightly. |
 |
I did not used the kits fuel tubing but use thicker BLUE LINE 3 m/m fuel silicone fuel line. If you use the kits fuel lines mount and route it like the picture shows. |
