STORM PRO

This is the building process of a GS-Racing STORM PRO with all pro's and con's found.

!Click on the pictures to enlarge!

STEP 38

	Take the shock boot and slide it over the ball end and into the groove at the bottom of the shock body.
	Now extend slowly the shock shaft and slide the shock boots over the ball end.
	For the shorter front absorbers you need to cut some material of the boots away.
	The four shock absorbers with shock boots.
	Take these parts.
	Slide the ring from the bottom up on the shock body.
	Make it touches the top of the shock body.
	Slide the corresponding spring on the shock body. Long spring on the long body and the short spring on the short body.
	Place at the bottom the spring retainer.
	All four shocks ready.

INDEX

© All rights reserved by