STORM PRO

This is the building process of a GS-Racing STORM PRO with all pro's and con's found.

!Click on the pictures to enlarge!

STEP 39

	We need these parts for STEP 39
	Press in each shock ball end a 5.8x5.3 m/m ball.
	Then it should look like this.
	Now press in every shock head cap a plastic bushing.
	Press a 5.8x5.3 m/m ball into the plastic bushing.
	Use a plyer to do that.
	The plastic bushing and ball installed in one of the shocks.
	Fit the shorter front shocks into the outside hole of the lower suspension arm. Do this for both sides.
	Fit the top of the shock absorber onto the already mounted 3 m/m screw and secure it with a 3x8x1 m/m washer and then a 3 m/m lock nut.
	For the rear fit the longer rear shocks into the center hole of the lower suspension arm. Do this for both sides.
	Here also mount the top of the shock absorber onto the 3 m/m screw.
	Secure it with a 3x8x1 m/m washer and then a 3 m/m lock nut.

INDEX

© All rights reserved by