STORM PRO

This is the building process of a GS-Racing STORM PRO with all pro's and con's found.

!Click on the pictures to enlarge!

STEP 40

	For STEP 40 we need these parts.
	Slide on each wheel axle a wheel hub.
	Align the holes and push a 3x16.8 m/m pin into the hole.
	Press this pin until it is flush with the hexagon of the wheel hub.
	Now place an 5x5 m/m set screw into the heart of the axle which is threaded. Do this for all four wheel hubs. I do not use thread lock!  Just tighten them firmly on all four wheel hubs.

INDEX

© All rights reserved by