This is the building process of a Hong Nor Speed 9.5 with all pro's and con's found.
Click on the pictures to enlarge
OPTION PARTS
 |
The full list with all available option parts from Hong Nor |
 |
The Soft spring set partnumber #324 |
 |
The Medium spring set part number #325 |
 |
The Hard spring set part number #326 |
 |
JS-30 is a full aluminum 2-piece
center diff mount. Take care for correct way of mounting otherwise a not free running center dif might be the result. The right procedure for assembling this diff mount as given by Hong Nor by email. 1) Screw in the bottom mount screws but do not tighten fully (2 turns left). 2) Fit the center differential in the bottom halves and fasten the top halves with the long top screws. 3) Tight the bottom screws to the chassis. |
 |
A new sliding clutch part number #327 |
 |
Aluminum spring holder washers part number #328[B] |
 |
Aluminum spring holder washers part number #328[O] |
 |
Aluminum spoiler washers part number # JS-27[B] |
 |
Aluminum spoiler washers part number # JS-27[O] |
 |
Multi color wings #JS-52 |
 |
Multi color stone guards part number #JS-33 |
|
|
Aluminum battery holders part number #JS-32 |
 |
Front and rear thorsen differential #JS-28 Click on the link above for more information |
 |
Center thorsen differential #JS-29 Click on the link above for more information |
 |
Machined steel differential gears #JS-01 |
 |
Aluminum fixed Toe in plates rear in 1.5, 2 and 3 degrees #JS-07 |
 |
CNC machined rear gear box front hinge pin holder #JS-02 |
 |
CNC machined front shock stay #JS-03 |
 |
CNC machined rear shock stay #JS-04 |
 |
CNC machined front plate #JS-05 |
 |
CNC machined steering plate with ball bearings #JS-05 |
 |
CNC machined chassis stiffeners front and rear #JS-15 |
 |
CNC machined adjustable rear toe in hinge pin holder #JS-10 |
 |
The manual that comes with #JS-10 |
 |
Patented CNC machined adjustable front camber hinge pin holder for 11,5-13-15 degrees #JS-11 |
 |
The manual that comes with #JS-11 |
 |
CNC machined radio tray posts #JS-22 |
 |
CNC machined wingstay bars #JS-23 |
 |
Steel 14 tooth pignon #JS-12 |
 |
Cupper filled brake disks #JS08 |
 |
Steel 50 tooth main gear #JS-16 |
 |
Steel 50 tooth main gear #JS-16 |
 |
Titanium coated steel 50 tooth main gear #JS-31 |
 |
Titanium coated steel 50 tooth main gear #JS-31 |
 |
Machined carbon fiber 2,5 mm radio tray #JS-17 |
 |
Machined carbon fiber 2,5 mm center plate #JS-18 |
 |
Machined carbon fiber 2,5 mm front plate #JS-19 |
 |
Machined carbon fiber 4 mm front shock stay #JS-20 |
 |
Machined carbon fiber 4 mm rear shock stay #JS-21 |
 |
Steel rear CVD drive axles #JS-25 |
 |
Steel center CVD drive axles JS-26 |
 |
|
|
Comment by |
