This is the building process of a Hong Nor Speed 9.5 with all pro's and con's found.
Click on the pictures to enlarge
Step 29
 |
Take the spoiler and turn it to the back and drill two holes of 7 mm with a distance of 50 mm in total. On the back of the spoiler there are 5 mm marks to make drilling easy with out the use of measuring tools. |
 |
Place the spoiler on the wings stay and put the black plastic washers on top. Then use 3x12 mm round head screws to secure the spoiler to the wing stay. I had to use screws from the emergency screw package that comes with the kit! |
 |
Nice that there is a metric marking molded on the back of the spoiler! |
|
Comment by |
