Test and Reviews

X1-CR

Click on the pictures to enlarge

Step 12

	Take from this plastic tree four of the anti roll bar ball ends.
	Take a 3 x 8 mm set screw and turn it in 4 mm using a 2 mm hexagon tool.
	Now fit on each end of the remaining thread an other ball end.
	Take a 3 x 5 mm set screw and fit it only 3 turns into the bossed ball using a 2 mm hexagon tool.
	Now fit in the other ball ends a 6 mm ball using a pliers. You need two of these anti roll bar connectors.
	No commnet.
Comment by

BACK TO THE INDEX

This car is provided by

Taiwan