Test and Reviews X1-CR

This is the building process of a Hong Nor X1-CR with all pro's and con's found.

Click on the pictures to enlarge

Step 21

 picsstep21-001.jpg (55020 bytes)  The plastic tree with parts for the wing stay.
 picsstep21-002.jpg (36856 bytes) Take the two hexagon plastic connection bars and place them in shock stay. 
 picsstep21-003.jpg (40269 bytes) Place the a-symmetrical wing connector and watch the way it is mounted.
At the red marked spots use 3 x 15 mm round head hexagon screws using a 2 mm hexagon tool.
 picsstep21-004.jpg (41940 bytes) Now place the third hexagon plastic connection bare and secure it with a 3 x 12 mm round head hexagon screw using a 2 mm hexagon tool.
 picsstep21-005.jpg (42006 bytes) Fit the other wing stay and secure a-symmetrical wing connector with 3 x 16 mm round head hexagon screws using a 2 mm hexagon tool at the red marked spots.
At the green marked spot fit a 3 x 12 mm round head hexagon screw using a 2 mm hexagon tool..
 picsstep21-006.jpg (43810 bytes) The wing stay ready.
The hexagon plastic connection bars are also available as aluminum version as option part.
 No comment.

Comment by

  

 

BACK TO THE INDEX

This car is provided by  Taiwan

 

© All rights reserved by