Test and Reviews X1-CR

This is the building process of a Hong Nor X1-CR with all pro's and con's found.

Click on the pictures to enlarge

Step 22

 picsstep22-001.jpg (51001 bytes)  Slide the complete wing stay trough the rear shock stay and fix at the red marked spots 4 x 16 mm round head hexagon screws using 2.5 mm hexagon tool.
 picsstep19-002.jpg (47568 bytes)  Take the rear brace connector from the plastic tree.
 picsstep19-003.jpg (45683 bytes)  Place this rear chassis brace connector on the rear gear box in-between the wing stay ends.
 picsstep19-004.jpg (43962 bytes) Secure at the red marked spots 4 x 12 mm round head hexagon screws using a 2.5 mm hexagon tool.
 picsstep22-002.jpg (45673 bytes) The X1-CR Pro version comes with aluminum T6-7075 grey anodized chassis braces.
This pictures shows the plastic and the aluminum version.
 picsstep22-003.jpg (50226 bytes) Fit the top of the rear chassis brace in-between the rear chassis brace connector and fit at the red marked spot a 4 x 16 mm round head hexagon screw using a 2.5 mm hexagon tool.
 picsstep22-004.jpg (53230 bytes) Fit at the red marked spot a 4 x 10 mm round head hexagon screw using a 2.5 mm hexagon tool.
 No comment.

Comment by

  

 

BACK TO THE INDEX

This car is provided by  Taiwan

 

© All rights reserved by