Test and Reviews X1-CR

This is the building process of a Hong Nor X1-CR with all pro's and con's found.

Click on the pictures to enlarge

Step 32

 picsstep32-001.jpg (41184 bytes) The grey hard coated anodized aluminum T6-7075 chassis has milled sections for the differential gears, engine and fueltank.
 picsstep32-002.jpg (41043 bytes) All holes are counter sunk.
 picsstep32-003.jpg (40049 bytes)  he stone guards.
 picsstep32-004.jpg (46263 bytes) Fit the stone guards to the chassis using 3 x 10 mm counter sunk screws using a 2 mm hexagon tool at the red marked spots.
The manual suggest to mount in this stage the muffler exit protector but we are going to do this is a later step.
 No comment.

Comment by

  

 

BACK TO THE INDEX

This car is provided by  Taiwan

 

© All rights reserved by