Test and Reviews X1-CR

This is the building process of a Hong Nor X1-CR with all pro's and con's found.

Click on the pictures to enlarge

Step 33

 picsstep33-001.jpg (51019 bytes)  Take the Z-brace and place it on the chassis as shown.
 picsstep33-002.jpg (42298 bytes)  Secure the Z-brace 3 x 10 mm countersunk hexagon screws at the red marked spots using a 2 mm hexagon tool.
 Nice the car comes with a dedicated brace to stiffen the chassis at the spot where the clutch bell is running.

Comment by

  

 

BACK TO THE INDEX

This car is provided by  Taiwan

 

© All rights reserved by