Test and Reviews X1-CR

This is the building process of a Hong Nor X1-CR with all pro's and con's found.

Click on the pictures to enlarge

Step 35

 picsstep35-002.jpg (55913 bytes) Fit both drive center drive shafts in the center differential outputs and place the center differential holders on the chassis.
 picsstep35-001.jpg (43470 bytes) At the red marked spots fit 4 x 12 mm countersunk hexagon screws using 2.5 mm hexagon tool.
Use light strength thread lock.
At the green marked spots fit 2.6 x 10 mm counter sunk self tapping screws using a Philips head 1screw driver
 picsstep35-003.jpg (56428 bytes)  The left hand view of the car.
 No comment.

Comment by

  

 

BACK TO THE INDEX

This car is provided by  Taiwan

 

© All rights reserved by