Test and Reviews

X1-CR

Click on the pictures to enlarge

Step 39

	Take the previous prepared radio box and radio tray and fit it to the chassis.
	At the red marked spots use 3 x 12 mm countersunk hexagon screws using a 2 mm hexagon tool.
	Place the appropriate servo arm adapter on the servo output spline.
	Fit the servo arm on the servo output adapter.
	Secure the servo steering rod to the servo saver arm with a 3 x 12 mm round head hexagon screw from the bottom upwards at the red marked spot using a 2 mmhexagon tool.
	No comment.
Comment by

BACK TO THE INDEX

This car is provided by

Taiwan