Test and Reviews X1-CR

This is the building process of a Hong Nor X1-CR with all pro's and con's found.

Click on the pictures to enlarge

Step 57

 picsstep57-001.jpg (54293 bytes) Fit the correct rim on the wheel adapter by hand and secure it with a 17 mm nut using a 17 tube wrench firmly.
Do not use tread lock!
Watch the rotation direction of the profile of the tyre.
 picsstep57-002.jpg (56629 bytes) The center hole of the rims are to small to use a standard large 4 way wrench.
 picsstep57-003.jpg (55634 bytes) I used a 17 mm socket wrench to tight the nuts.
 picsstep57-004.jpg (67401 bytes) All four rims mounted.
 picsstep57-005.jpg (65876 bytes) All four rims mounted.
The rims center hole could have been a little wider so it accepts standard hobby tools.

Comment by

  

 

BACK TO THE INDEX

This car is provided by  Taiwan

 

© All rights reserved by