Test and Reviews

X1-CR

Click on the pictures to enlarge

Step 6

	Take from the plastic tree the A or B coded upper and lower rear black plastic hinge pin holders. The upper and lower black plastic hinge pin holders must always be an A + A or B + B combination. The letters signing A or B are pressed in the black plastic hinge pin holders. A is for milder response steering where B is more quicker response steering
	If you opt to go for the A + A version (mild steering) fit at the red and green marked spots 4 x 16 mm countersunk hexagon screws using a 2.5 mm hexagon tool. We opted for the B + B version and found that fully fixing the green marked 4 x 16 mm countersunk hexagon screws have to be taken out completely to mount the upper hinge pins in an easy way in later stage. So only fit those two screws two or three turns when using the B upper hinge pin holder. So in the B + B case only fit the red marked 4 x 16 mm countersunk hexagon screws fully with a 2.5 mm hexagon tool.
	No comment.
Comment by

BACK TO THE INDEX

This car is provided by

Taiwan