Test and Reviews X3-SABRE

This is the building process of a Hong Nor X3 SABRE with all pro's and con's found.

TOOLS YOU NEED AND ARE NOT IN THE KIT


Screwdriver Philips head 1
Screwdriver flat tip small
Hexagone tool 1.0 mm
Hexagone tool 1.5 mm
Hexagone tool 2.0 mm
Hexagone tool 2.5 mm
Hexagone tool 3 mm
Nutdriver 5.5 mm
Nutdriver 4 mm
Wrench 8 mm
Wrench 4 mm
Pliers (small)
Pliers (large)
Wire cutter
Curved lexan scissors
Reamer
Hobby knife
Waterproof sanding paper
Cyano Acrylic glue
Thread lock in low strength
Thread lock in medium strength
High speed tool
Caliper

Or you can use the toolset

Our set where nicely engraved with the name of our TWF8 website

 

BACK TO THE INDEX

This car is provided by
Taiwan
The engine and tools are provided by
The Netherlands
The decals are provided by
The Netherlands
The Balance Station is provided by
The Neterlands
     

© All rights reserved by