|
RMV Speed II |
|
|
|
|
| Order number | RMV TU9530 (35 mm flywheel) RMV TU9531 (38 mm flywheel) |
| Type | Pin swinging |
| Pins | 2 |
| Number of shoes | 2 |
| Return spring(s) | 2 |
| Return spring(s) type | Coils preloaded with a screw. |
| Clutch adjustable | Yes by a screw without having to remove the engine from the buggy. |
| Special clutch bells required | Yes. You can use other bells but may have to drill 2 holes to access the screws used for adjusting. |
| Usage |
How to adjust this clutch can be found by clicking this link |
| Options |
Optional 1] TU9536 - White Teflon shoes 2] TU9541 - 13 tooth clutch bell TU9541 - 14 tooth clutch bell TU9541 - 15 tooth clutch bell All with drilled adjusting holes 3] TU9540 - 0.9 mm special spring |
| Extra info | If you use a Speed II clutch for break in
remember that the speed II comes with a default configuration of really
late engagement. Breaking in an engine that way will not load the engine
enough. If you turn each adjustment screw out by 1 - 1 1/2 turns then
breaking in the engine is no problem. Comment by Markus Laun for TEAM TWF8 |
|
Manufacturer |
|
